SE Perry Kramer Ripper 27.5'' 2021 Complete BMX
Features:
- Frame: 6061 Aluminum Floval Tubing, Internally-machined Integrated Head Tube, Symmetrical Looptail Rear End, 73mm Euro Bottom Bracket, 142mm Spaced Dropouts, Internal Cable Routing on Top Tube, Disc Brake Tabs
- Fork: Landing Gear, Full Cr-Mo, 419mm Axle to Crown, 29mm Offset, 110mm Spaced Dropouts
- Crankset: SE Racing 175mm Forged Alloy 2-pc Cranks, External Sealed Euro Bottom Bracket, 24mm Hollow Alloy Spindle, 39T Alloy Chainring
- Pedals: X-Pedo Low-profile Platform w/ Removable Pins
- Chain: KMC S1
- Wheelset: Alloy 36H Nutted Hubs, Sealed Rear, 110mm Front Hub & 142mm Rear Hub, w/ Alex DP30 Tubeless Compatible, Double-Wall Disc Rims, 17T Cassette, Stainless Spokes, Tubeless Valves, Tubeless Rim Tape
- Tires: Vee Tire Co x SE Racing Speedster, Tubeless Ready, Folding, 72TPI, 27.5 x 2.5" Front & Rear
- Brakeset: SRAM Level, Hydraulic Disc, 2-Piston Caliper, 160mm Rotor, Expandable Bladder, Timing Port Closure, DOT 5.1 Fluid
- Brake Levers: SRAM Direct Link Level, Alloy
- Headset: FSA Orbit CE, Sealed 1-1/8" Integrated
- Handlebar: Big Honkin' Cr-Mo Cruiser Bar, 29" x 7", 12° Backsweep, 2° Upsweep
- Stem: Retro Alloy Top-Load w/ Engraved SE Logo on Top & Sides, 55mm Reach
- Grips: Oakley B-1B, Made in USA, w/ Perry Kramer Donuts
- Seat: Perry Kramer SE Flyer Seat w/ Custom SE Bottle Opener Brace
- Seatpost: Micro-Adjust Alloy, 27.2mm
- Seat Clamp: Promax Quick Release Seat Clamp, 31.8mm Inner Diameter
- Accessories: SE Racing Snap Padset, Alloy Valve Caps, Custom Perry Kramer PK Ripper 27.5 Sticker Sheet, SE Chain Tensioners, Tubeless Valves, Tubeless Rim Tape
- Weight: 33.1 lbs / 15.01 kgs
Sizing:
- Suggested Rider Size: 5'3"+ (160cm+)
Geometry:
- Top Tube, Actual: 22.8"
- Seat Tube, Center To Top: 15.7"
- Seat Tube Angle: 73°
- Head Tube Angle: 71°
- Chainstay Length: 17.4"
- Wheelbase: 42.7"
- Bottom Bracket Height: 11.9"
- Standover: 29.5"
When the original PK Ripper burst onto the scene in 1979, it took the BMX world by storm & set a new benchmark for radness. Here we are now 40+ years later and it's happening again with the new PK Ripper 27.5, designed by the man himself, the PK of "PK Ripper", Perry Kramer. This ultra-cool bike features tubeless ready 27.5" x 2.5" Vee Speedster tires, sealed internal headset, internal cable routing, SRAM Level hydraulic disk brakes, Oakley B-1B grips, and of course Perry's stamp of approval. This is the PK of the future!
Important Note: Our bikes require some assembly on delivery. See our Warranty Page for more details.
SCOOTERS & E-SCOOTER GUIDES
SKATEBOARD & LONGBOARD GUIDES
BIKE & BMX GUIDES
SKATES & HEELYS GUIDES
PROTECTION & EXTRAS
WATERSPORTS
