CORE Titanium Halfbarz V2 HIC/SCS Scooter Handle Bars - Black/Raw 680mm
Now £169.95 Was £199.95 (15% Off)
CORE Titanium Halfbarz V2 HIC/SCS Scooter Handle Bars
Features:
- Dimensions: H 680mm x W 630mm
- Two-Tone Split Paint Design (Black/Raw)
- Slit: 3cm Slit On Left Side Reduce Forward Pressure
- Compatibility: HIC & SCS
- SCS Adapter Plug Included
- CORE Logo Lasered Detail
- Reinforced 2mm Crossbar
- Pro Model: Jack 'Half Barz' Ward
- Weight: 700g
Materials:
- Titanium Grade 9
Jack "Halfbarz" Ward gets his second signature bar from CORE. Halfbarz has been part of the CORE team since the start in 2017 and has grown into one of the best park riders in the game. From Nitro Circus shows in Paris to his local skatepark Adrenaline Ally, he’s known for always sending it. Chances are you've seen one of his countless viral Instagram clips.
Jack was one of the original riders to test the first batch of CORE® Titanium Bar and has been riding them ever since. CORE Titanium bars are some of the most sought-after and lightest scooter bars on the market. CORE have developed these bars to be super light and super strong. Reducing the weight of your handlebars can shave kg’s off the weight of your scooter improving your trick ability, especially Barspins and Tailwhips.
CORE Titanium Bars have been ridden, tested, and approved by some of the best riders in the world. Constructed out of space grade titanium and designed to feel perfect in your hands with our ergonomic design. These bars are a must-have for ALL experienced scooter riders who are serious about riding.
These Titanium bars fit both SCS and HIC models, all the bars come with an adapter plug for SCS that will cancel out the compression HIC slit and make your bars SCS. Weighing in at less than 700g; CORE have saved as much weight as possible without sacrificing strength.
Titanium Bar Installation Guide:
- When fitting the bars to your scooter, first ensure the clamp you are using covers the height of the slit. If the clamp does not cover the height of the slit then it will cause the bars to spin or fail.
- When tightening your clamp, you must turn each bolt equally to apply a balanced amount of pressure on the bar. The best method for this is half a turn top bolt, half a turn bottom bolt, then half a turn middle bolt (if you have 3 bolts) repeat this process until the bars are secure.
- Your clamp should have an equal gap all the way down the back. If it is not equal, you have an uneven amount of pressure on the bar. If uneven remove the clamp and repeat step 2.
PLEASE NOTE: Titanium is a high-grade metal and any modification of these bars will void your warranty. These bars come with a 30 Day none negotiable warranty due to the nature of the material. Titanium bars are created for the experienced rider and should be treated as such. Titanium is strong and lightweight but it is not indestructible.
SCOOTERS & E-SCOOTER GUIDES
SKATEBOARD & LONGBOARD GUIDES
BIKE & BMX GUIDES
SKATES GUIDES
PROTECTION & EXTRAS
WATERSPORTS
Reviews
