If you think you’ve had all the fun you can possibly have with your hoverboard, think again!
Unleash the full potential of your Hoverboard by transforming it into a Hoverkart with a simple attachment. A Hoverkart enables riders to sit on their Hoverboard and use it like a Go-Kart, moving freely through the caster wheel mounted at the front and using hand levers to operate it!
If you’ve been struggling to get the hang of riding your Hoverboard standing, then a Hoverkart offers a simple alternative. It also eliminates the risk of falling and is much easier to control as a Hoverkart, making it much safer to ride. Hoverkarts are super easy to attach and detach from the board - check out these simple instructions below!
How to attach your Hoverkart to your Hoverboard
First off, you will need both your Hoverkart and Hoverboard.
Place the Hoverkart in front of the Hoverboard and undo the velcro straps on the Kart.
Pick up the Hoverkart and pull it toward the Hoverboard, placing it on top of the Hoverkart like so. Pull the loose straps from behind, underneath the Hoverkart, ready to thread through the buckles.
Loop the velcro straps through the buckles at both the front and back and pull them back on themselves, fastening the velcro to fix them in place. Make sure they are tight!
Before mounting the kart, give it a gentle shake to make sure that it is fixed in place properly and will not fall off the Hoverboard.
Finally, hop on and kart away!
Note: The arms of some Hoverkarts can be adjusted to fit the footplate of the Hoverboards, like the one shown in this tutorial. To adjust these, simply loosen off this nut with a spanner, adjust to fit the Hoverboard footplace, and tighten again.
If you have any questions about Hoverboards, Hoverkarts, or how to attach your Hoverkart to your Hoverboard, please don’t hesitate to get in touch with us at firstname.lastname@example.org, or drop us a call on 0121 501 1111!